print command

    (A) Function
        Outputting a facility value at the current simulation time with 
        a specified format.

    (B) Format

        print  <format>  { <facility> }

    (C) Parameters
       <format>
         This parameter is a character string to specify an output format.
         The characters that are not 'n' and 't' and follow '\' are returned with no change.
         The character strings '\n' and '\t' yield a linefeed code and a tab code, respectively.
         The conversion instructions are the characters that do not follow \ but cover the range 
         from % to a first non-numeral character (including the first character itself). 
         These characters are replaced for output as follows. The characters not included 
         in the conversion instructions are returned with no change. 

         The conversion instructions are interpreted as the following pattern: 
         '%' { <digit> } < conversion instruction character >
         
          Except the case of < conversion instruction character > being 't', 
          the n-th conversion instruction in <format> determines how to output 
          a facility value specified by the n-th < facility > parameter.
          The <digit> series specifies the number of characters output as 
          a result of the replacement. If this is not specified, the number of 
          characters needed to output a value is obtained.
          The following description explains differences of outputs by 
          <conversion instruction character >:
          
          Conversion 
          instruction                command
          character        
                  b          A facility value in binary notation.
                  d          A facility value in decimal notation.
                  o          A facility value in octal notation.
                  x          A facility value in hexadecimal notation.
                  s          A status value of stage/segment. 
               others        A facility value in hexadecimal notation.
          The conversion instruction character 't' outputs the current time in decimal notation.

        <facility>
          Designate a facility you want to obtain with the report function. 
          If you want to obtain a value of an address word in a memory facility, 
          designate '@'  < address > after the facility name. Here, < address >
          is an unsigned integer.

    (D) Notes
        If the number of the conversion instruction 't's is not equal to that of 
        the <facility> parameters, extra <facility> parameters are ignored and
        the extra conversion instructions are replaced with null character strings.

    (E) Related items
        set command
        memset command
        memclr command
        rpt_add command